Hoshizaki C-101BAH-AD Uživatelský manuál stáhnout pdf (Strana 25)

Fig. 30

Piping to approved drain.

Leave a 2-inch (5-cm) vertical

air gap between the end of the

pipe and the drain.

2-inch (5-cm)

air gap

Floor

Drain

Shut-Off Valve

Drain Valve

Water Supply Inlet

1/2" FPT

Drain Outlet

1/2" FPT

Vented Tee Connection

Extend the vent at least 12"

(30 cm) above the drain outlet.

Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent

Minimum 1/2" Nominal ID Hard Pipe

or Equivalent

Be sure there is sufficient extra

water supply line and drain line

for the appliance to be pulled

out for service.

• For gravity drain installation, drain must have 1/4" fall per foot (2 cm per 1 m) on horizontal

runs to get good ow. A vented tee connection is also required for proper ow. Extend the

vent at least 12" (30 cm) above the drain outlet.

• For optional drain pump installation, refer to the instructions included with the pump.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Žádné komentáře

Hoshizaki C-101BAH-AD Uživatelský manuál Strana 25