Hoshizaki KML "F" SERIES Uživatelský manuál stáhnout pdf (Strana 105)

105

[2] Remove the water from the potable water supply line:

1) Turn off the power supply and remove the Front Panel.

2) Move the Control Switch, on the Control Box, to the “OFF” position.

3) Wait 3 minutes.

4) Close the Potable Water Supply Line Shut-off Valve and open the Potable Water

Supply Line Drain Valve.

5) Allow the line to drain by gravity.

6) Attach compressed air or carbon dioxide supply to the Potable Water Line Drain Valve.

7) Move the Control Switch to the “ICE” position.

8) Replace the Front Panel and turn on the power supply.

9) Blow the potable water line out using compressed air or carbon dioxide.

[3] Drain the Potable Water Tank:

1) Turn off the power supply.

2) Remove the Front Panel.

3) Move the Control Switch to “SERVICE” and move the Service Switch to the

“DRAIN” position

4) Replace the Front Panel and turn on the power supply for 2 minutes.

5) Turn off the power supply.

10) Allow the line to drain by gravity.

11) Attach compressed air or carbon dioxide supply to the Condenser Water Line Drain

Valve.

12) Blow the water-cooled Condenser out, using compressed air or carbon

dioxide until water stops coming out.

1 2 ... 100 101 102 103 104 105 106 107 108 109

Žádné komentáře

Hoshizaki KML "F" SERIES Uživatelský manuál Strana 105